NR800 Noise Reduction Processor Native v7: Real-Time Plugin by McDSP Free Download

Most of the NR800's processing works on broadband frequencies. For problem areas, you can focus noise reduction on a narrow part of the spectrum using its focus points. The eight bands each have a noise reduction amount fader and a noise detection threshold marker.

An input filter section offers high-pass and low-pass pre-filtering with slopes up to 36 dB per octave. These filters can be set at frequencies independent of the focus points, which helps keep the detection stage from reacting to content you want to keep.

A Range control scales overall reduction from 100% down to off. The Response control sets how quickly reduction recovers after a noise event.

Noise reduction modes provide a range from smooth to aggressive amounts. An x2 mode doubles reduction in all bands, which is useful when noise is severe and finer adjustment is not needed.

Snap Gain and Snap Threshold let you match the gain and thresholds to the incoming signal for fast setup. An NR Bias selector determines which reduction amounts are activated when snapping. Each band can be bypassed or soloed so you can audition the noise it is removing. Master and linked controls, as used across McDSP plugins, handle grouped adjustments.